Q: Part numbers and coils fix solutions

B16/B18 DOHC VTEC - Coils 30520-PVF-A01 - Oil rings 30522-RNA-A01 - OEM valvecover D14/D15/D16 SOHC - Coils 30520-PVJ-A01 - D17 valvecover form civic 2001-2005 F20/H22/H23 DOHC VTEC - Coils 30520-PNA-007 - OEM valvecover

Question 1

Hondavert COILKIT compatible with the following cars

Accepted Answer

1992-2000 Integra DA/DB/DC
1988-2000 Civic EF/EG/EH/EJ/EK/MA/MB
1992-2000 Domani
1992-2001 Prelude IV/V Gen
1993-2001 Accord V/VI Gen CC/CD/CE/CF/CG/CH
1998-2001 Torneo

And many other cars with 4-cylinder B / D / F / H series engines

Question 2

What sotware can I use?

Accepted Answer

Hondata SManager

Device is working only when HondaVert S300 installed in ECU and SManager software used for tuning.

Question 3

Advantages of the Coil on Plug system

Accepted Answer

A stronger and more stable spark (very important for Turbo and high CR setups)
Individual coils are more durable

Question 4

HondaVert COILKIT Installation guide

Accepted Answer

Check your ECU for a Q37 transistor. If the transistor is not installed, install the transistor from the installation kit
Transistor PartNumber C2240

Remove distributor cap, ignitior unit, ignition coil and rotor as shown.

COILKIT Parts for replacement OEM ones

Ignitor unit assemblying. An electrical contact is required between ignitor unit and mount plate. Do not lubricate with sealant or thermal compound.

Clean contact points as shown. An electrical contact is required between COILKIT main PCB and Distributor housing. Do not lubricate with sealant or thermal compound.

Install main PCB and Ignitor unit to distributor. Use thread locker. Without thread locker is a risk of bolts and nuts loosening and damage internal parts of distributor.

Use Heat Shrink tube to insulate ring terminal.

Install main connector to Cap. Use thread locker. Without thread locker is a risk of nut loosening and damage internal parts of distributor.

Inside distributor connections. Connect as shown.

Install assembled distributor to engine.

Outside distributor connections. Connect AltC wire to PIN А16 of OBD1 ECU, Connect Ring terminal to termostat housing.

Coil on Plug must be activated in SManager. Go to Smanager -> Parameters -> Misc. Enable this 3 options and upload calibration to ECU

Question 5

Part numbers and coils fix solutions

Accepted Answer

B16/B18 DOHC VTEC
- Coils 30520-PVF-A01
- Oil rings 30522-RNA-A01
- OEM valvecover

D14/D15/D16 SOHC
- Coils 30520-PVJ-A01
- D17 valvecover form civic 2001-2005

F20/H22/H23 DOHC VTEC
- Coils 30520-PNA-007
- OEM valvecover